TERMINUS / Barrister

Time
in tenths.

Hours on the left. Tenths on the right. A mechanical chronograph concept built around the time spent on a task.

Explore every view

In development · Steel · 39 mm

Current steel Barrister, showing its domed crystal, recessed silver dial and suede strap
Brushed steel · Silver dial · Brown suede

At closer range

The complete form.

Follow the crystal from its crown to the bezel. Look through the dial, along the case, and underneath the watch.

The Barrister dial with hours on the left and tenths on the right

The dial

Silver ground, recessed registers and a dark chapter. A twelve-hour scale on the left; tenths on the right.

Enlarge ↗
The Barrister in profile, with its domed crystal and downturned lugs

The profile

A continuous dome above the bezel. Downturned lug ends and the caseback return are visible in this control-side view.

Enlarge ↗
The Barrister caseback and strap attachment

The caseback

The caseback curves into the case, with the lugs and strap departure visible from below.

Enlarge ↗
The Barrister in an oblique view

The whole watch

Directional brushing across the steel, polished transitions and the soft surface of brown suede.

Enlarge ↗

Steel and glass

A curve over
the dial.

A continuous crystal dome rises above the dial. Brushed steel carries the broad surfaces; polished transitions catch the light.

Current side profile with the continuous domed crystal and caseback return
Case diameter
39 mm
Lug-to-lug span
45 mm
Strap opening
20 mm
Exterior study height
12.85 mm

Exterior design dimensions. Movement and production development are detailed below.

The intended timing

Keep the time.
Round the reading.

  1. Start a task.

    The display follows active elapsed time.

  2. Stop to read.

    The accumulated total rounds up once to the next six-minute unit. Exact boundaries stay unchanged.

  3. Resume.

    The unrounded total returns. Continue the task without counting the pause.

At the hour boundary

59:01 elapsed reads 1 hour, 0 tenths when stopped. Resume returns to 59:01.

Proposed indication study

Run. Stop.
Resume.

Hours on the left, tenths on the right. Stop to see the reading round up to the next six minutes; resume to return to the unrounded time. Begins at 58:55 and runs in real time. Choose 60× for a faster demonstration.

Schematic Barrister indication studySchematic dial: a twelve-hour register on the left, tenths register 0 to 9 on the right, independent running seconds at six o'clock, a central chronograph sweep turning once per six minutes, and decorative hour and minute hands at 10:10.HOURSTENTHSSECONDSCHRONO · 6 MINOVER RANGE
Six-minute sweep · Running seconds at six

Stopped · 1×

Raw elapsed
00:58:55
Billed reading
1.0 h
Central chrono sweep · one turn per 6 min of raw time
4.9 of 6 min
Running seconds at 6 · independent of the chronograph
00 s
Chronograph
Speed
Starting points (stopped)
Animation

A proposed display arrangement; its physical transmission remains to be designed. The hour and minute hands illustrate 10:10. Study time pauses off screen.

From design to geometry

Inspect the watch.
Change the design.

Explore the case dimensions, dial artwork and editable watch design.

Open this watch in the studio
Movement and production development

The SW510 M supplies source datums and a donor layout reference. Its stock outputs do not provide the proposed hours-left and tenths-right functions. No production movement is selected.

The rounding mechanism, coordinated carry, lower donor-output accommodation and added module height remain unresolved. The 12.85 mm exterior includes no allowance for that unknown module.

Hand fit, seals, retention, strap attachment and wearing comfort require physical development. The rendered steel and suede are finish studies, not qualified production samples.

Capture and image source record ↗

Read about development. The public studio saves designs in your browser; new CAD and renders require the local service.