Design notes / 31 October 2026

Timing through
interruptions.

Rounding a reading should not change the time being kept.

A task can occupy an afternoon without taking all of it. You start, stop for something else, then return. The Barrister is being developed to keep that active time together and show the accumulated total in hours and six-minute units.

The distinction is what the timer remembers. Stop at eight minutes and twenty-four seconds and the intended display shows two tenths of an hour. Resume and the retained eight minutes and twenty-four seconds returns. The rounded reading has not replaced the original time.

Pauses do not become separate rounded entries. When stopped, the accumulated total rounds up to a six-minute unit. An exact six-minute boundary stays unchanged.

Hours and tenths also carry together. Fifty-nine minutes and one second becomes one hour and zero tenths when stopped. Resume and timing continues from the retained fifty-nine minutes and one second.

This behaviour works in the software study. The physical mechanical module has not been built. Its transmission, rounding and retention remain unresolved.

The dial has to make the distinction readable. Its registers need enough presence to show elapsed time without obscuring the time of day. A large image is useful for examining details; the lettering also needs to be judged at its actual size within the case.

Try the timing study

The current digital design

Case profile
and controls

Profile of the current ivory Barrister digital design, showing the broad case flank, lug roots, crown and exposed pusher stems
Ivory · current CAD render, not a manufactured watch

The side view exposes a broad case flank and substantial lug roots. The crystal, bezel and back create several layers, but the middle still gives the watch a heavy appearance.

The exposed pusher stems look slight beside that mass. This is a question of visual proportion; the image supplies no evidence of their physical strength or feel.

The current exterior is 13.1 mm thick and excludes the unknown height of a qualified custom module. A complete assembly and a watch on a strap are still needed to judge the result. The current appearance has been rejected and is not a selected product design.

Decisions to test

Reading, wearing
and making

  1. Read both displays at actual size.

    Test ordinary time and elapsed time at several hand positions.

  2. Judge the complete watch.

    Compare front, oblique and profile views together, with a plausible strap.

  3. Resolve the case in section.

    Consider wall, crystal, bezel and back together. Perceived mass and measured height are different questions.

  4. Connect lugs, strap and controls.

    Study the lug transition, strap articulation, crown and pushers as one composition.

  5. Adapt the lettering to its role.

    Develop antique forms separately for hour figures, register figures and signatures.

  6. Change the light.

    Test metallic marks across lighting conditions, including the weak 12 and 6 in the Ink study.

  7. Set the hierarchy before adding decoration.

    Compare spacing and visual weight before introducing texture or ornament.

  8. Qualify the actual processes.

    Test printing and applied components before claiming craft, finish quality or durability.

Lettering and production

Forms shaped
for a dial

The founder’s preference is for strong antique letterforms without artificial distress. No replacement face is selected. Choosing a font is a starting point; widths, stroke relationships and spacing still need to be resolved for each dial role. anOrdain’s account of dial lettering

Pad printing transfers ink from engraved artwork through a silicone pad. That process is distinct from making and attaching a raised numeral. Neither a clean vector outline nor a valid CAD solid qualifies the finished part. anOrdain’s dial-printing process

Bauhaus teaching offers a useful method of examining form, size, colour and production together. It supplies no ready-made style for this watch. Historical Bauhaus publications also used roman serifs alongside sans-serif faces. Joost Schmidt’s lettering teaching Letterform Archive’s historical specimens

Read the development record